Comments for Think. Gusius.

Comment on DIY Keg Floating Dip Tube Mk3 by Apache_brew

Apache_brew — Fri, 02 Oct 2020 20:28:40 +0000

It looks like Kegland came out with a version of the same plastic filter that you modified for use previously. https://www.kegland.com.au/floating-dip-tube-filter-80-mesh-304-stainless-for-fermzilla-or-kegmenter.html Works directly with the fermzilla floating dip tube.

Comment on F-TPMS Fermentation Monitoring Part 1 by DrGus

DrGus — Wed, 27 May 2020 22:41:32 +0000

In reply to Rob. Yes Im sure you could. I just worry about aggressive ferments that end up frothing out the entire vent line...

Comment on F-TPMS Fermentation Monitoring Part 1 by Rob

Rob — Wed, 27 May 2020 17:03:47 +0000

Great idea and proof of concept. I agree with Pierrick. I’d like to see this built into a spunding valve assembly, and measure the gas volume exiting the valve. That way, with a little math, we can monitor the progress of the whole pressure fermentation, just like the PLAATO airlock.

Comment on DIY Keg Floating Dip Tube Mk3 by DrGus

DrGus — Fri, 15 May 2020 22:24:43 +0000

In reply to Will Graham. I wouldnt recommend it. However despite that, it may work for a while. Since hot dip galvanizing is a coating, your first issue is abrasion against the float. Second, zinc in the coating is sacrificial and over time you may find it corrodes...

Comment on DIY Keg Floating Dip Tube Mk3 by DrGus

DrGus — Fri, 15 May 2020 22:15:46 +0000

In reply to Julian. I still use both methods. I use the mesh filter version for dry hopping and it works well.

Comment on DIY Keg Floating Dip Tube Mk3 by Julian

Julian — Fri, 15 May 2020 13:21:31 +0000

Great post! But why the omission of the mesh filter in your latest versions?

Comment on DIY Keg Floating Dip Tube Mk3 by DrGus

DrGus — Sat, 18 Apr 2020 23:04:12 +0000

In reply to Nils Petter Vogt.

Its an off the shelf replacement diptube for the keg. It is mentioned in mk1: http://think.gusius.com/diy-keg-floating-dip-tube/

Comment on DIY Keg Floating Dip Tube Mk3 by Nils Petter Vogt

Nils Petter Vogt — Sat, 18 Apr 2020 22:05:48 +0000

So, what is that metal insert for the hose that the wire wrappes around called and where is it sourced?

Comment on ESP32 ADC to measure below 100mV by Paul

Paul — Wed, 01 Apr 2020 21:54:10 +0000

That’s killa

Comment on F-TPMS Fermentation Monitoring Part 1 by DrGus

DrGus — Wed, 25 Mar 2020 21:14:12 +0000

In reply to Pierrick. Yes I suppose you could. However I need the gas port to connect the spunding valve to for fermentation. If you only use this for kegging then yes but you would have to make some sort of disconnect to schrader valve thread adapter.